RIGOL DS6000 Series - Manual (Page 194)

RIGOL 10 Waveform Recording
DS6000 User’s Guide 10-2
Waveform Recording
Waveforms from all the channels currently turned on will be recorded during
waveform recording.
Press UTIL  Record  Mode and use
to select “Record” to turn the
waveform recording operation menu on.
1. End Frame
Press End Frame and use to set the desired number of frames to be
recorded. The number of frames available is related to the memory depth
currently selected.
2. Recording Operation
Waveform recoding can be realized via the shortcut buttons in the menu or at
the front panel.
Menu Front Panel
Press Operate and
select “●” to start
recoding. Press , the backlight goes on (in red) and starts
to flash, which indicates that the recording is
started.
When the recording is
finished, “●” changes
to “■” automatically.
You can also select “■”
manually. When the recoding is finished, goes off
automatically and the backlight of goes on (in
orange). You can also press directly.
Navigation Knob (Playback)
UTIL
Play/Pause (Playback)
Stop Recording/Playback
Record (Record)