RIGOL DS6000 Series - Manual (Page 270)

RIGOL 16 Specifications
DS6000 User’s Guide 16-4
interval)
Time Setting 10 ns to 1 s
Video Trigger
Signal Standard
Support standard NTSC, PAL and SECAM broadcasting
standards; support 480P, 576P, 720P, 1080P and 1080I
HDTV standards
Pattern Trigger
Pattern Setting
H, L, X, Rising Edge, Falling Edge
RS232/UART Trigger
Trigger Condition
Start, Error, Check Error, Data
Polarity Normal, Invert
Baud Rate 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,
57600 bps, 115200 bps, User
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition
Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bit, 8 bit, 10 bit
Address Range 0 to 127, 0 to 255, 0 to 1023
Byte Length 1 to 5
SPI Trigger
Trigger Condition
CS, Timeout
Timeout Value 100 ns to 1 s
Data Bits 4 bit to 32 bit
Data H, L, X
Clock Edge Rising Edge, Falling Edge
CAN Trigger
Signal Type
Rx, Tx, CAN_H, CAN_L, Differential
Trigger Condition SOF, EOF, Frame Type
Baud Rate 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3
kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps,
1 Mbps, User
Sample Point 5% to 95%
Frame Type Data, Remote, Error, OverLoad
FlaxRay Trigger
Baud Rate
2.5 Mb/s, 5 Mb/s, 10 Mb/s
Trigger Condition Frame, Symbol, Error, TSS