RIGOL DS6000 Series - Manual (Page 44)

RIGOL 1 Quick Start
DS6000 User’s Guide 1-22
Menu
ACQ: press this key to enter sample setting
menu to set the acquisition mode, the sampling
mode, the memory depth and the antialiasing
function of the oscilloscope.
CURS: press this key to enter cursor
measurement menu. The oscilloscope provides
three cursor modes: manual, track and auto.
SAVE: press this key to enter file store and
recall interface. The storable file types include
traces, waveforms, setups, picture and CSV.
Support internal and external storage as well as
disk management.
DISP: press this key to enter display setting menu to set the display type,
persistence time, wave intensity, grid type, grid brightness and menu display time of
the waveform.
UTIL: press this key to enter the system function setting menu to set the
system-related functions or parameters, such as I/O setting, sound and language.
Support some advanced functions such as pass/fail test, waveform record and print
setting.
HELP: press this key to turn on the help interface. For detailed information, please
refer to the introduction in “To Use the Built-in Help System”.
Record
Play/Pause: in stop or pause state, press this key to play back the
waveform and press again to pause
the play. The backlight is
illuminated in yellow.
Stop: press this key to stop the waveform in record or playback
mode. The backlight is illuminated in orange.
Record: press this key to start recording the waveform. The
backlight is illuminated in red.