Time base mode, Y-t mode, Time base mode -4 – RIGOL DS6000 Series User Manual

Page 74: Y-t mode -4

Text mode
Original mode

RIGOL

DS6000 User’s Guide

3-4

Time Base Mode

Press MENU in the horizontal control area at the front panel and then press Time
Base to select the time base mode of the oscilloscope and the default is Y-T mode.

Y-T Mode

This mode is the main time base mode and is applicable to CH1-CH4 input channels.
In this mode, the Y axis represents voltage and the X axis represents time. Note: only
when this mode is enabled can “Delayed Sweep” be turned on.