RIGOL DS6000 Series - Manual (Page 127)

6 To Make Measurements RIGOL
DS6000 User’s Guide 6-3
Subtraction
Subtract the waveform voltage values of signal source B from A point by point and
display the results.
Press MATH  Operate to select “A-B”:
 Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
 Press Invert to turn the invert display of the operation results on or off.
 VERTICAL
POSITION, VERTICAL
SCALE, HORIZONTAL
POSITION and HORIZONTAL SCALE can also be used to adjust the
display of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results.
Press MATH  Operate to select “A x B”:
 Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
 Press Invert to turn the invert display of the operation results on or off.
 VERTICAL
POSITION, VERTICAL
SCALE, HORIZONTAL
POSITION and HORIZONTAL SCALE can also be used to adjust the
display of the operation results.