Cursor measurement, Cursor measurement -27 – RIGOL DS6000 Series User Manual

Page 151

Text mode
Original mode

RIGOL

DS6000 User’s Guide

6-27

Cursor Measurement

Cursors are the horizontal and vertical marks that can be used to measure the X axis
values (usually Time) and Y axis values (usually Voltage) on a selected waveform.
Please connect the signal to the oscilloscope and obtain stable display before using
cursor measurement. All the “Auto Measure” parameters can be measured through
cursor measurement.

Press the front panel function menu CURS  Mode, use

to select the desired

cursor mode (the default is OFF) and then press the knob. The modes available
include Manual, Track and Auto.

CURS