RIGOL DS6000 Series - Manual (Page 218)

RIGOL 12 Store and Recall
DS6000 User’s Guide 12-8
Figure g
5) Press OK to execute the saving operation.
2. Load the specified type of file in the external USB storage device.
1) Press SAVE  Storage to select “Traces” and then press Load to turn on
the interface as shown in Figure h. Use to select “Disk E” and press
down to open the USB storage device (Figure i).
Figure h
2) As shown in Figure i, use to select the desired file to load and then press
Load to load the selected file.
Figure i