RIGOL DS6000 Series - Manual (Page 126)

RIGOL 6 To Make Measurements
DS6000 User’s Guide 6-2
Math Operation
DS6000 can realize various math operations of waveforms between channels
including addition (A+B), subtraction (A-B), multiplication (AxB), division (A÷B), FFT,
logic operation and advanced operation. The results of math operation also allows
further measurement (for details, please refer to “Cursor Measurement”).
Press MATH  Operate in the vertical control area (VERTICAL) at the front panel
to select the desired operation function. The result of the math operation is displayed
on the waveform marked with “M” on the screen.
Addition
Add the waveform voltage values of signal source A and B point by point and display
the results.
Press MATH  Operate to select “A+B”:
 Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
 Press Invert to turn the invert display of the operation results on or off.
 VERTICAL
POSITION, VERTICAL
SCALE, HORIZONTAL
POSITION and HORIZONTAL SCALE can also be used to adjust the
display of the operation results.
MATH