Horizontal, Horizontal -18 – RIGOL DS6000 Series User Manual
Page 40

RIGOL
DS6000 User’s Guide
1-18
HORIZONTAL
MENU: press this key to turn on the
horizontal control menu under which to
turn on or off the delayed sweep
function, switch between different time
base modes, switch between “Coarse”
and “Fine” adjustment of scale as well
as modify the horizontal reference
setting.
HORIZONTAL SCALE: modify the horizontal time base. Turn clockwise to
reduce the time base and turn counterclockwise to increase the time base. During
the modification, waveforms of all the channels will be displayed in expanded or
compressed mode and the time base message (e.g.
) at the upper side
of the screen would change accordingly. Press down this knob to quickly switch to
delayed sweep state.
HORIZONTAL POSITION: modify the trigger position. The trigger point
moves left or right relative to the center of the screen when you turn the knob.
During the modification, waveforms of all the channels would move right or left and
the trigger position message (e.g.
) at the upper-right corner of
the screen would change accordingly. Press down this knob to quickly restore the
trigger position (or the delayed sweep position).