Measure – RIGOL DS6000 Series User Manual
Page 271
RIGOL
DS6000 User’s Guide
16-5
USB Trigger
Signal Speed
Low Speed, Full Speed
Trigger condition
SOP, EOP, RC, Suspended, Exit Suspended
Measure
Cursor
Manual
Mode
Voltage Deviation between Cursors (△V)
Time Deviation between Cursors (△T)
Reciprocal of △T (Hz) (1/△T)
Track Mode
Voltage and Time Values of the Waveform
Point
Auto Mode
Allow to display cursors during auto
measurement
Auto Measurement
Measurements of Maximum, Minimum, Peak-Peak Value,
Top Value, Bottom Value, Amplitude, Average, Mean
Square Root, Overshoot, Pre-shoot, Area, Period Area,
Frequency, Period, Rise Time, Fall Time, Positive Pulse
Width, Negative Pulse Width, Positive Duty Cycle,
Negative Duty Cycle, Delay AB , Delay AB , Phase
AB , Phase AB
Number of
Measurements
Display 5 measurements at the same time.
Measurement Range
Screen or cursor
Measurement Statistic
Average, Max, Min, Standard Deviation, Number of
Measurements
Frequency Counter
Hardware 6 bits frequency counter
(channels available: DS606x, CH1/CH2; DS610x,
CH1/CH2/CH3/CH4)