RIGOL DS6000 Series - Manual (Page 162)

RIGOL 7 Protocol Decoding
DS6000 User’s Guide 7-4
The decoding table displays the decoded data and the corresponding line
number and time in table format. It can be used to observe relatively longer
decoded data to solve the problem that some data could not be seen clearly on
the screen.
Press Event Table  Event Table to select “ON” (note that this operation is
only available when BusStatus is set to “ON”) to enter the decoding table
interface as shown in the figure below. If a USB storage device is currently
connected to the instrument, press Export to export the data table to the
external USB storage device in CSV format.