RIGOL DS6000 Series - Manual (Page 128)

RIGOL 6 To Make Measurements
DS6000 User’s Guide 6-4
Division
Divide the waveform voltage values of signal source A by B point by point and display
the results. It can be used to analyze the multiple relationships of waveforms in two
channels. Note that when the voltage value of channel B is 0, the result of the
division is treated as 0.
Press MATH  Operate to select “A ÷ B”:
 Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
 Press Invert to turn the invert display of the operation results on or off.
 VERTICAL
POSITION, VERTICAL
SCALE, HORIZONTAL
POSITION and HORIZONTAL SCALE can also be used to adjust the
display of the operation results.