RIGOL DS6000 Series - Manual (Page 268)

RIGOL 16 Specifications
DS6000 User’s Guide 16-2
Maximum Input
Voltage (1MΩ)
Maximum Input Voltage of the Analog Channel
CAT I 300 Vrms, CAT II 100 Vrms,
Transient Overvoltage 1000V pk
with RP2200 10:1 probe: CAT II 300 Vrms
with RP3300 10:1 probe: CAT II 300 Vrms
with RP3500 10:1 probe: CAT II 300 Vrms
with RP5600 10:1 probe: CAT II 300 Vrms
Horizontal
Timebase Scale DS606X: 1 ns to 1000 s
DS610X: 500 ps to 1000 s
Timebase Accuracy ≤ ±(5 + 2 ×instrument age in years) ppm
Delay Range Pre-trigger (negative delay): ≥1 screen width
Post-trigger (positive delay): 1 s to 100,000 s
Timebase Mode Y-T, X-Y, Roll, Delayed Sweep
Number of XYs 2 simultaneously
Waveform Capture
Rate
[1]
150,000 wfms (vector display); 180,000 wfms (dots
display)
Vertical
Bandwidth (-3dB) DS606X: DC to 600 MHz
DS610X: DC to 1 GHz
Single-shot Bandwidth DS606X: DC to 600 MHz
DS610X: DC to 1 GHz (each channel)
Vertical Resolution 8bit, two channels sample at the same time
Vertical Scale 2 mV/div to 5 V/div (1 MΩ)
2 mV/div to 1 V/div (50 Ω)
Offset Range 2 mV/div to 124 mV/div: ± 1.2 V (50 Ω)
126 mV/div to 1 V/div: ± 12 V (50 Ω)
2 mV/div to 225 mV/div: ± 2 V (1 MΩ)
230 mV/div to 5 V/div: ± 40 V (1 MΩ)
Bandwidth Limit [2] 20 MHz or 250 MHz