RIGOL DS6000 Series - Manual (Page 237)

13 System Function Setting RIGOL
DS6000 User’s Guide 13-5
range of the first nnn is from 0 to 223 (except 127) and the ranges of the other three
nnn are from 0 to 255. You are recommended to ask your network administrator for
an address available.
press DNS and use
to input the desired address. Generally, users do not need to
set the DNS, therefore this parameter setting can be ignored.
Tips
 When the three IP configuration types are all turned on, the priority of the
parameter configuration from high to low is “DHCP”, “Auto IP” and “Static IP”.
 The three IP configuration types can not be all turned off at the same time.
Apply the Network Parameter Setting
Press Apply to validate the current network parameter setting.
Initialize the network Parameters
Press Initialize to return the network parameters to the default state.
MAC Address
For each oscilloscope, the MAC address is unique. When attributing the IP address
for the oscilloscope, the MAC address is usually used to identify the instrument.
VISA Address
Display the VISA address currently used by the oscilloscope.