RIGOL DS6000 Series - Manual (Page 148)

RIGOL 6 To Make Measurements
DS6000 User’s Guide 6-24
All Measurement
All measurement could measure all the time and voltage parameters (each
measurement source has 20 items, measurements can be performed on the five
measurement sources at the same time) of the current measurement source and
display the results on the screen. Press MEAS  Display All to turn the function on
or off. Press All Measure Source and use
to select the channel to be measured
(CH1 to CH4 and MATH).
 When all measurement is turned on, “One-key” measurement is also valid.
 “Clear” will not clear all the measurement results.
All Measurement
One-key
Measurement