RIGOL DS6000 Series - Manual (Page 29)

1 Quick Start RIGOL
DS6000 User’s Guide 1-7
To Use the Battery
This oscilloscope also provides rechargeable battery on your option. Please install the
battery as shown in the figure below. When leaving the factory, the battery holds
certain electric quantity. When use the battery alone, a battery icon
will be
displayed at the lower-right corner of the screen and the remaining electric quantity
is indicated (no display when the AC power and battery are used at the same time).
When the electric quantity of the battery is too low, “Low Battery!” will be displayed.
If recharge is needed, please install the battery correctly and then follow the
instructions in “To Connect to AC Power Supply” to connect the oscilloscope to
AC power supply to recharge the battery. It needs about 15 hours for the battery to
finish recharging.
Figure 1-6 To Install the Battery