RIGOL DS6000 Series - Manual (Page 251)

13 System Function Setting RIGOL
DS6000 User’s Guide 13-19
Normal Print
After “Normal” is selected, please refer to the following steps to set the print
parameters to execute print.
1. Print Range
Press this softkey to select “Screen” (default) or “Wave”.
 Screen: print the whole screen image.
 Wave: only print the waveform and the basic information.
2. Palette
Press this softkey to select “Grayscale” (default) or “Color”.
3. Invert
Press this softkey to turn the invert print on or off.
4. Preview
Press this softkey to open the preview interface.
5. Header
Press this key to set the header in print.
6. Footer
Press this softkey to set the footer in print.
7. Print
After setting the print parameters, press this softkey or press the shortcut
key at the front panel directly to execute the print operation.