Reference clock, Reference clock -16 – RIGOL DS6000 Series User Manual

Page 248

Text mode
Original mode

RIGOL

DS6000 User’s Guide

13-16

Reference Clock

This oscilloscope can output the internal 10 MHz sample clock from the [10MHz
In/Out] connector at the rear panel and accept an external 10 MHz clock to
synchronize multiple oscilloscopes.

Press UTIL  RefClock to select the desired clock type.

 ClockOutput: configure the [10MHz In/Out] connector as an output and

output the internal 10 MHz clock.

 ClockInput: configure the [10MHz In/Out] connector as an input and the

oscilloscope will accept an external 10 MHz clock input from this connector.

10MHz In/Out