HEIDENHAIN TNC 410 ISO Programming - Manual (Page 95)

HEIDENHAIN TNC 410, TNC 426, TNC 430 69
4.5
File Manag
e
men
t f
o
r th
e TNC
4
1
0
Data transfer to or from an external data
medium
Call the file manager.
Activate data transfer: Press the EXT soft key. In the
left half of the screen the TNC shows all files saved
on its hard disk. In the right half of the screen it shows
all files saved on the external data medium.
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window.
Moves the highlight from the left to the right window,
and vice versa.
If you wish to copy from the TNC to the external data medium, move
the highlight in the left window to the file to be transferred.
If you wish to copy from the external data medium to the TNC, move
the highlight in the right window to the file to be transferred.
Before you can transfer data to an external data medium,
you must setup the data interface (see “Setting the Data
Interface for the TNC 410” on page 393).
If a file to be read in already exists in the memory of the
TNC, the TNC displays the message File xxx already
exists. Read in file?
In this case, answer the dialog
question with YES (file is the read in) or NO (file is not read
in).
Likewise, if a file to be read out already exists on the
external device, the TNC asks whether you wish to
overwrite the external file.