6 cr eating and w riting pr ogr ams – HEIDENHAIN TNC 410 ISO Programming User Manual
Page 108
82
4 Programming: Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.6 Cr
eating
and
W
riting
Pr
ogr
ams
Inserting blocks at any desired location
U
U
U
U
Select the block after which you want to insert a new block and
initiate the dialog.
Editing and inserting words
U
U
U
U
Select a word in a block and overwrite it with the new one. The plain-
language dialog is available while the word is highlighted.
U
U
U
U
To accept the change, press the END key.
U
U
U
U
To reject the change, press the DEL key.
If you want to insert a word, press the horizontal arrow key repeatedly
until the desired dialog appears. You can then enter the desired value.
Looking for the same words in different blocks
For this function, set the AUTO DRAW soft key to OFF.
To select a word in a block, press the arrow keys
repeatedly until the highlight is on the desired word.
Select a block with the arrow keys.
The word that is highlighted in the new block is the same as the one
you selected previously.
Finding any text
U
U
U
U
To select the search function, press the FIND soft key. The TNC
displays the dialog prompt Find text:
U
U
U
U
Enter the text that you wish to find.
U
U
U
U
To find the text, press the EXECUTE soft key.
Inserting the previously edited (deleted) block at any location
U
U
U
U
Select the block after which you want to insert the block you have
just edited (deleted) and press the INSERT NC BLOCK soft key.
Block display
U
U
U
U
If a block is so long that the TNC cannot display it in one line (for
example in a fixed cycle), this will be indicated with “>>” at the right
edge of the screen.