Network drive management (ethernet option only) – HEIDENHAIN TNC 410 ISO Programming User Manual
Page 90
64
4 Programming: Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.4 E
x
pan
d
ed
File Manag
e
men
t T
N
C
4
26, TNC 430
Overwriting files
If you copy files into a directory in which other files are stored under
the same name, the TNC will ask whether the files in the target
directory should be overwritten:
U
U
U
U
To overwrite all files, press the YES soft key, or
U
U
U
U
To overwrite no files, press the NO soft key, or
U
U
U
U
To confirm each file separately before overwriting it, press the
CONFIRM soft key.
If you wish to overwrite a protected file, this must also be confirmed
or aborted separately.
The TNC in a network (applies only for Ethernet
interface option)
If the TNC is connected to a network, the directory window
1
displays
up to 7 drives (see figure at right). All the functions described above
(selecting a drive, copying files, etc.) also apply to network drives,
provided that you have been given the corresponding rights.
Connecting and disconnecting network drive
U
U
U
U
To select the program management: Press the PGM
MGT key. If necessary, press the WINDOW soft key
to set up the screen as it is shown at right.
U
U
U
U
To manage the network drives: Press the NETWORK
soft key (second soft-key row). In the right-hand
window
2
the TNC shows the network drives
available for access. With the following soft keys you
can define the connection for each drive.
To connect the Ethernet card to your network, (see
“Ethernet Interface (not TNC 410)” on page 400).
The TNC logs error messages during network operation
(see “Ethernet Interface (not TNC 410)” on page 400).
Function
Soft key
Establish network connection. If the connection is
active, the TNC shows an M in the Mnt column. You can
connect up to 7 additional drives with the TNC.
Delete network connection.
Automatically establish network connection
whenever the TNC is switched on. The TNC shows an
A
in the Auto column if the connection is established
automatically.
Do not establish network connection automatically
when the TNC is switched on.
2
1