HEIDENHAIN TNC 410 ISO Programming - Manual (Page 469)

HEIDENHAIN TNC 410, TNC 426, TNC 430 443
13.3 T
e
c
h
n
ical In
fo
rm
atio
n
Data transfer rate Maximum 115 200 baud via V.24/V.11
Maximum 1 Mbaud via Ethernet interface (optional, not TNC 410)
Ambient temperature ■ Operation: 0° C to +45° C (32° to 113° F)
■ Storage: –30°C to +70°C (–22° F to 158° F)
Traverse range Maximum 100 m (3973 inches)
TNC 410: Maximum 30 m (1181 inches)
Traversing speed Maximum 300 m/min (11 811 ipm)
TNC 410: Maximum 100 m/min (3 937 ipm)
Spindle speed Maximum 99 999 rpm
Input range ■ Minimum 0.1µm (0.00001 inches) or 0.0001° (TNC 410: 1 µm)
■ Maximum 99 999.999 mm (3937 in.) or 99 999.999°
TNC 410: Maximum 30 000 mm (1181 inches) or 30 000.000°
Input format and unit of TNC functions
Positions, coordinates, circle radii, chamfer
lengths -99 999.9999 to +99 999.9999
(5.4: places before decimal point, places after decimal point) [mm]
Tool numbers 0 to 32 767.9 (5.1)
Tool names 16 characters, enclosed by quotation marks with TOOL CALL. Permitted
special characters: #, $, %, &, -
Delta values for tool compensation -99.9999 to +99.9999 (2.4) [mm]
Spindle speeds 0 to 99 999.999 (5.3) [rpm]
Feed rates 0 to 99 999.999 (5.3) [mm/min] or [mm/rev]
Dwell time in Cycle 04 0 to 3 600.000 (4.3) [s]
Thread pitch in various cycles -99.9999 to +99.9999 (2.4) [mm]
Angle of spindle orientation 0 to 360.0000 (3.4) [°]
Angle for polar coordinates, rotation, tilting
the working plane -360.0000 to 360.0000 (3.4) [°]
Polar coordinate angle for helical
interpolation (G12/G13) -5 400.0000 to 5 400.0000 (4.4) [°]
Datum numbers in Cycle 7 0 to 2 999 (4.0)
Scaling factor in Cycles 11 and 26 0.000 001 to 99.999 999 (2.6)
Miscellaneous functions M 0 to 999 (1.0)
Q parameter numbers 0 to 399 (1.0)
Q parameter values -99 999.9999 to +99 999.9999 (5.4)
Labels (G98) for program jumps 0 to 254 (3.0)
TNC Specifications