HEIDENHAIN TNC 410 ISO Programming - Manual (Page 209)

HEIDENHAIN TNC 410, TNC 426, TNC 430 183
8.3 Cy
cles f
o
r Dr
illing
, T
a
p
p
ing
and
Th
read Millin
g 8.3 Cycles for Drilling, Tapping and
Thread Milling
Overview
The TNC offers 9 (or 19) cycles for all types of drilling operations:
Cycle Soft key
G83 PECKING
Without automatic pre-positioning
G200 DRILLING
With automatic pre-positioning, 2nd set-up clearance
G201 REAMING
With automatic pre-positioning, 2nd set-up clearance
G202 BORING
With automatic pre-positioning, 2nd set-up clearance
G203 UNIVERSAL DRILLING
With automatic pre-positioning, 2nd set-up clearance,
chip breaking, and decrementing
G204 BACK BORING
With automatic pre-positioning, 2nd set-up clearance
G205 UNIVERSAL PECKING
(not TNC 410)
With automatic pre-positioning, 2nd set-up clearance,
chip breaking, and advanced stop distance
G208 BORE MILLING
(not TNC 410)
With automatic pre-positioning, 2nd set-up clearance