HEIDENHAIN TNC 410 ISO Programming - Manual (Page 55)

HEIDENHAIN TNC 410, TNC 426, TNC 430 29
2.5
Tilting
the W
o
rk
in
g P
lane (no
t T
N
C
4
1
0)
To activate manual tilting:
To select manual tilting, press the 3-D ROT soft key.
You can now select the desired menu items with the
arrow keys
Enter the tilt angle.
To set the desired operating mode in menu option "Tilt working plane"
to Active, select the menu option and shift with the ENT key.
To conclude entry, press the END key.
To reset the tilting function, set the desired operating modes in menu
"Tilt working plane" to Inactive.
If the tilted working plane function is active and the TNC moves the
machine axes in accordance with the tilted axes, the status display
shows the symbol
If you set the function "Tilt working plane" for the operating mode
Program Run to Active, the tilt angle entered in the menu becomes
active in the first block of the part program. If you are using Cycle 19
WORKING PLANE
in the part program, the angular values defined in the
cycle (starting at the cycle definition) are effective. Angular values
entered in the menu will be overwritten.