Grass Valley Trinix Multiviewer Installation - Manual (Page 81)

81 TRINIX TMV Installation and Service Manual
Section 5 — System Configuration
Additional rows will be needed for each additional TMV board in the
system.
For the configuration steps, see the CM-4400 Installation and Operating
Manual.
Configuring Encore to Support Trinix Multiviewer
Encore must be configured to support the Trinix TMV. You will need to
access the RCL Server and the Flags and Parameter screen. You will need to
add a minimum of two clients, one for the TMV board and one for the TMV
PC. Additional entries will be needed for each additional TMV board in the
system.
Refer to the Encore Control System Installation and Service manual for more
information.
Before starting this process, make sure that you have the latest version of
the Encore software.
You will need to:
• Create an Ethernet Client
• Select the Protocol Type