Grass Valley Trinix Multiviewer Installation - Manual (Page 195)

195 TRINIX — TMV Installation and Service Manual
Section 8 — Trinix Multiviewer Controller
Figure 194. Example of a 200% Zoom
Checking the Bezel
You can verify the Bezel markers on the monitor and adjust the bezel if
needed by moving the mouse on the overhead monitor and clicking the
mouse just before it is out of range. Bezel settings are limited to 100.
Follow these steps to verify the Bezel markers:
1. Select the Check Bezel button, two blue bezel markers will appear
( Figure 195 ).
Note The greater the zoom percentage used while doing this step, the better the
granularity of the calibration due to smoother mouse movement.