Grass Valley Trinix Multiviewer Installation - Manual (Page 192)

TRINIX — TMV Installation and Service Manual 192
TMV Controller Operations
TMV Controller Operations
This section explains the steps needed to use the TMV Controller’s features.
Checking the System Status
The System status can be verified by selecting the System Status button.
Follow these steps to check the status of the system:
1. Click the System Status button. The System Status display will then
appear ( Figure 188 ).
Figure 188. The System Status Display
This display will show the status and IP address for the TMV boards,
Editor, and Controller. A green light in the Alive column means the TMV
Type item is operating without issues. A red light indicates that there is a
problem.
2. Click the Close button to close the System Status Display.
Retrieving a Configuration Layout File
A Configuration Layout file.XML file can be retrieved from the TMV board
using the System Status Display. This file can be imported to the Editor. You
can then perform on-screen operations except for Bezel setting.
Note Every Monitor must have at least one Video tile.
Follow these steps to retrieve a Configuration Layout file:
1. Click the System Status button. The System Status display will then appear
( Figure 189 on page 193 ).
2. Click the Request... button under the Cfg File column.