Grass Valley Trinix Multiviewer Installation - Manual (Page 36)

TRINIX — TMV Installation and Service Manual 36
Overview
* Each TMV board will need two slots if it is installed in a symmetrical frame.
The TMV boards must be placed in an Output board slot. The following
examples show the location for the TMV board for the specific routing
switcher. The correct slots that may be used are shown in gray.
TMV Location in the 128x256 Routing Switcher on page 36
TMV Location in the 256x512 Routing Switcher on page 37
TMV Location in the 512x1024 Routing Switcher on page 38
TMV Location in the 128x128 Routing Switcher on page 40
TMV Location in the 256x256 Routing Switcher on page 41
TMV Location in the 512x512 Routing Switcher on page 42
TMV Location in the 128x256 Routing Switcher
071873500_128x256_Slotmap-TMV-board
The 128x256 routing switcher has the capacity for eight (8) TMV boards. No
ventilation slots are required.
Place board in the four (4) slots in the outer right and the four (4) to the
outer left Output slots.