Grass Valley Trinix Multiviewer Installation - Manual (Page 201)

201 TRINIX — TMV Installation and Service Manual
Section 9 — TMV Logging Commands
Table 7. telnetLoggingOff
Command Example Definition
telnetLoggingOff telnetLoggingOff The telnetLoggingOff command turns off telnet logging for
this telnet session only.
Table 8. stopAllTelnetLogging
Command Example Definition
stopAllTelnetLogging stopAllTelnetLogging The stopAllTelnetLogging command turns off telnet log-
ging for all registered telnet sessions.
Table 9. telnetLoggingShow
Command Example Definition
telnetLoggingShow TMV>
telnetLoggingShow
SendLogMsgTelnet:
:Show
Active telnet
logging sessions
= 0 out of 3 max.
SendLogMsgTelnet:
:Show
Active telnet
logging sessions
= 2 out of 3 max.
Logging
session pio 0 =
0x20495ad0
Logging
session pio 1 =
0x20493b90
The telnetLoggingShow command shows how many telnet
sessions that are currently configured display logging.
Table 10. setGMTOffset
Command Example Definition
setGMTOffset TMV> setGMTOffset
usage:
setGMTOffset hh
mm The setGMTOffset command sets the GMT (Greenwich
Mean Time) offset. GMT is used in the time stamp for
log messages in order to show the current time zone.
The hour (hh) field accepts values from -23 to 23 and
the minute (mm) field accepts values from -59 to 59. For
example, the GMT offset for Salt Lake City, Utah would
be: setGMTOffset -7 0