Grass Valley Trinix Multiviewer Installation - Manual (Page 128)

TRINIX — TMV Installation and Service Manual 128
Router Information/Configuration Tables Tab
Router Information/Configuration Tables Tab
The Router Information/Configuration Tables tab is where you configure the TMV
to use your control system information ( Figure 94 ). The last retrieved
router data will be loaded when the application is launched.
Figure 94. The Router Information/Configuration Tables Tab
NP Host IP Address field : Enter the IP Address of the control system.
Get Configuration Button : Clicking this button retrieves the control
system information. The data will be saved at the following location:
C:\Grass Valley\Trinix Multiviewer\RouterData\
The file name will contain the IP address of the host. This path is dis-
played on the application after the
Load Offline Router Data button
( Figure 94 ).
Load Offline Router Data Button : Clicking this button loads router data
from a previous saved file.
Levels : This area displays the defined Levels that were retrieved from the
control system.
Sources : This area displays the defined Sources that were retrieved from
the control system.