Grass Valley Trinix Multiviewer Installation - Manual (Page 154)

TRINIX — TMV Installation and Service Manual 154
Adding a Monitor
Adding a Monitor
The Multiviewer will display multiple video signals, which may be used
for picture presence monitoring on monitors. A monitor must be added to
display this information. These instructions assume that you have selected
the
Layout tab. A frame node called “TrinixFrame” is added under the “Unti-
tled” root node by default.
Follow these steps to add a monitor:
1. Right click the Trinixframe item under the Untitled root node and select
the
Add a system option to add a system. A node called System1 will
appear.
2. Right-click on the System node under the Trinixframe item and select
the
Add a Wall option. A node called MonitorWall1 will appear. The wall
properties are displayed in the Properties panel ( Figure 153 ).
3. Click the Toolbox tab and then click the Monitor icon.
Figure 153. Properties Panel Information
4. Double-click the Monitor icon. A monitor should be added to the Wall
in the Design panel.
If there are monitors on the wall already, the new monitor will be placed at
the end of the monitors and on the right side.
A monitor tree node will be added to the Navigation panel when a monitor
is added. The monitor can be selected by clicking on the tree node or by
clicking the monitor itself.
Wall Path
Select the Monitor icon.
wall proper-
ties dis-
played