Tools panel – Grass Valley Trinix Multiviewer Installation User Manual
Page 121
121
TRINIX — TMV Installation and Service Manual
Section 6 — Trinix Multiviewer Editor
View drop-down list
: Select the resolution that you want to view the
monitor at by selecting the View drop-down list. The options are Wall view,
Monitor Fill, and Monitor Resolution.
Note
Minor Adjustment using the Ctrl+Arrow key combination is only allowed in
the Monitor Resolution mode.
Show Association button
: Clicking this button shows any association
between Video Tiles, and other items. Any item can be associated with a
tile. A yellow label with tile ID will be displayed on the other items if it is
associated with a tile. This button is located above the Design panel.
Apply to Selected Monitor(s)
: Select this option if you want to apply the
Main Reference monitor's layout to other monitors. You will need to use
Shift
and click or the
Ctrl+A
key combination to select multiple monitors.
Grid Spacing drop-down list
: Select preference from the drop-down list to
change the grid line spacing from the 1/4 default. The options are, 1/4, 1/
8, 1/16, and 1/32.
Show Grid Button
: Select this button to show the spacing grid or to turn it
off.
Back to wall view Button
: This button is only available in the Monitor Fill
mode. Select this button to change back to the Wall View mode.
Tools Panel
The Tools panel section is at the bottom of the Design panel. There are three
tabs,
Toolbox
,
Tile Patterns
, and
Add More
). These tabs
will not appear until a Wall is added and selected, in the Navigation panel.
Figure 89. The Tools panel Section of the Design Panel
Toolbox
When the
Toolbox
tab is selected, you can add monitors; add Video tiles
based on the aspect ratio; and add Digital clocks, Audio bars, and Text
Boxes (
). These tools are added by dragging them from the Tools
panel section onto the Monitor or added by double clicking them.
Tile Patterns
The
Tile Patterns
tab displays tiles from which you can select a pre-built
pattern and apply it to a monitor (