Grass Valley Trinix Multiviewer Installation - Manual (Page 31)

31 TRINIX TMV Installation and Service Manual
Section 1 — Overview
TMV Compatibility
The Trinix Multiviewer is compatible with:
• Trinix NXT (Broadlinx 3.3.0 and newer)
• Sonata
• Apex
• Encore (Version 1.8.2 and newer)
• Jupiter AccuSwitch (Version 7.9.1 and newer)
• NetConfig (Version 2.0.13 and newer)
• TSL (Protocol V5.0 UDP)
• Image Video (RDU 1100 TCP)
Control System
The Trinix Multiviewer product integrates with a router control system
using Native Protocol. The Trinix Multiviewer board inputs are configured
as router destinations and can be controlled by any control panel that has
access to those destinations.
Either Grass Valley's Jupiter AccuSwitch, or Encore control systems may be
used with the Trinix Multiviewer board. The following versions of the
Grass Valley control systems are the minimum required to use the Trinix
Multiviewer:
• Encore 1.8.2
• AccuSwitch 7.9.1
Future releases of these programs will support the TMV.
Network Control
The Trinix Multiviewer requires two network connections; one named
CNTL (control) and one named FAC (facility). The Facility LAN is used to
communicate with external TMV components. For example, Router
Control System (via Native Protocol), logging, and Tally. The Control LAN
is used to communicate with the TMV components. For example, the TMV
Control application and the TMV Configuration Editor application.