Grass Valley NewsEdit XT v.5.5 - Manual (Page 252)

Chapter 13 Sending & Storing Completed Sequences
250 Digital News Production
5. Mark an In point.
The timecode of the record tape shows up at the Mark In point.
6. Press F12 on the keyboard, or click the Record button, to start recording.
After the sequence is done recording, the deck will stop.
7. Close the Play To Tape window.
8. Review your recorded story on tape by clicking the Record To Bin button
in the main toolbar.
Storing Sequences on NewsEdit
Instead of sending your sequences to a playback server, you can save them on
your NewsEdit workstation to use later. To save a completed sequence, you
send it to a bin on the same computer you are using. You can then create master
clips instead of saving the entire sequence and the clips it uses.
To set up a send location for your system, see “Setting Up Send Locations” on
page 318. It is a good idea to create a bin specifically for holding stored
sequences, such as HFR (Hold For Release).
To send a sequence to your system:
1. Click once on the sequence title that you want to send.
2. Press F2 on the keyboard.
The Select Destination window appears, showing all available locations:
3. Click on the box for your system.
4. Click Send to send your sequence.
Your sequence archives as a single clip.
To archive a sequence so it can be edited later, export it in .AAF format:
• Select File | Export | EDL , select a location for the file, select AAF Files as
the Save as type, and click Save .