Grass Valley NewsEdit XT v.5.5 - Manual (Page 144)

Chapter 7 Fine Tuning and Advanced Editing
142 Digital News Production
Selected Area
To copy and paste an area of the sequence:
1. Mark an In Point at the start of the material to move.
2. Mark an Out Point at the end of the material.
3. Turn off any tracks you don’t want to cut or copy.
4. Right-click in a track and select one of these functions: Cut Area , Copy
Area , Delete Area , or Lift Area .
5. If desired, paste the material into another part of this sequence or another
sequence.
Make sure you remove any mark points from your sequence before pasting
material; NewsEdit pastes material at the Mark Out point.
Saving the Timeline Track Configuration
With NewsEdit, you can save the current positions of the tracks in the Timeline
and use these settings for future timelines.
Settings that get saved are:
• Sync lock
• Track activation
• Track height
• Waveform zoom level
• Show/hide audio waveform and fade control points
To save your track settings:
1. Make adjustments to the tracks until you are satisfied with the settings.
2. Select Window | Save Track Configurations .
Each new timeline that you create uses these settings.