Grass Valley NewsEdit XT v.5.5 - Manual (Page 183)

Removing Fade Control Points
Digital News Production 181
Removing Fade Control Points
To remove a fade control point, press Ctrl + click on the fade control point.
Notice that the cursor changes to a red hand, allowing you to click and remove
the control point.
To remove all of the fade control points, right-click within the audio clip and
select
Clear Fade Control Points .
You can also remove an area of fade control points:
1. Set a Mark In and Mark Out point to indicate the section of fade control
points to remove.
2. Right-click on the audio track and select Clear Fade Control Points Area .
All fade control points between the Mark Points, on active tracks, are
deleted.
Ganging and Adjusting Multiple Audio Tracks
Instead of adjusting multiple audio tracks individually, you can gang and adjust
multiple tracks at the same time.
To adjust multiple audio tracks:
1. In the Audio Mixer Tool, check the Gang checkbox for each track you want
to adjust.
2. Move the slider up or down to set the track volumes.
To turn off ganging, uncheck the checkboxes.
Sliders move
together to
adjust entire
audio track
Check this checkbox
to gang audio tracks