Artesyn MVME2502 Installation and Use (April 2015) - Manual (Page 79)

Controls, LEDs, and Connectors
MVME2502 Installation and Use (6806800R96E) 79
3.5 Switches
These switches control the configuration of the MVME2502.
3.5.1 Geographical Address Switch (S1)
The Tsi148 VMEbus Status Register provides the VMEbus geographical address of the
MVM2502. The switch reflects the inverted states of the geographical address signals.
Applications not using the five row backplane can use the geographical address switch to
assign a geographical address based on the following diagram.
Board Malfunction
 Switches marked as “reserved” might carry production-related functions and can cause
the board to malfunction if their settings are changed.
 Do not change settings of switches marked as “reserved”. The setting of switches which
are not marked as “reserved” has to be checked and changed before board installation.