Artesyn MVME2502 Installation and Use (April 2015) - Manual (Page 15)

MVME2502 Installation and Use (6806800R96E) 15
About this Manual
Overview of Contents
This manual is intended for users who install and configure MVME2502 product. It is assumed
that the user is familiar with the standard cabling procedures, configuration of operating
systems, U-Boot system and MVME Chassis.
The purpose of this manual is to describe MVME2502 product and the services it provides. This
manual includes description of MVME2502 product hardware, firmware and also information
about operating system.
This manual is divided into the following chapters and appendices.
 About this Manual lists all conventions and abbreviations used in this manual
and outlines the revision history.
 Safety Notes summarizes the safety instructions in the manual.
 Sicherheitshinweise is a German translation of the Safety Notes chapter.
 Introduction gives an overview of the features of the product, standard compliances,
mechanical data, and ordering information.
 Hardware Preparation and Installation outlines the installation requirements, hardware
accessories, switch settings, and installation procedures.
 Controls, LEDs, and Connectors describes external interfaces of the board. This includes
connectors and LEDs.
 Functional Description includes a block diagram and functional description of major
components of the product.
 Memory Maps and Registers contains information on system resources including system
control and status registers and external timers.
 Boot System describes the boot loader software.
 Programming Model contains additional programming information for the board.
 Replacing the Battery contains the procedures for replacing the battery.
 Related Documentation provides a listing of related product documentation,
manufacturer’s documents, and industry standard specifications.