Artesyn MVME2502 Installation and Use (April 2015) - Manual (Page 78)

Controls, LEDs, and Connectors
MVME2502 Installation and Use (6806800R96E) 78
3.4.2.7 Miscellaneous P2020 Debug Connectors(P4)
This is used for processor debugging. It is a depopulated connector labeled P4, located at the
bottom side of the board near the processor.
17 NC NC NC NC NC NC
18 GND GND NC GND GND NC
19 CLK + CLK - NC NC ROOT0
(PULLED UP) NC
Table 3-16 XMC Connector (XJ2) Pin out (continued)
Pin Row A Row B Row C Row D Row E Row F
Table 3-17 P2020 Debug Header (P4)
Pin
Signal
Description
1 MSRCDI0
2 GND
3 MSRCDI1
4 MDVAL
5 MSRCDI2
6 TRIG_OUT
7 MSRCDI3
8 TRIG_IN
9 MSRCID4
10 GND