Installation, Of mvme2502-hdmntkit1/mvme2502-hdmntkit2 – Artesyn MVME2502 Installation and Use (April 2015) User Manual
Page 48
Hardware Preparation and Installation
MVME2502 Installation and Use (6806800R96E)
48
2.5.3
Installation of MVME2502-HDMNTKIT1/MVME2502-
HDMNTKIT2
Installation Procedure
1. Attach washers and hex standoffs to HDD received with the MVME2502-HDMNTKIT1 /
MVME2502-HDMNTKIT2.
2. Assemble the SATA adapter board to the blade and ensure that it is properly aligned with
the standoff. Attach the screws to anchor the SATA adapter board to the blade.
Note: The 3.3V key must be removed to install the SATA kit.
This manual is related to the following products:
- MVME2502 Installation and Use (August 2014) MVME2500 Installation and Use Manual (February 2014) MVME2500 ECC Installation and Use (August 2014) MVME2500 Installation and Use (April 2015) MVME2500 Installation and Use Manual (March 2015) MVME2502 Installation and Use (April 2014) MVME2502 Installation and Use (December 2014)