6 installing and removing the board, Installing and removing the board – Artesyn MVME2502 Installation and Use (April 2015) User Manual
Page 50
Hardware Preparation and Installation
MVME2502 Installation and Use (6806800R96E)
50
4. Attach HDD with interface PCB to main board using screws as shown below:
2.6
Installing and Removing the Board
This section describes the recommended procedure for installing the board in a chassis. Read
all warnings and instructions before installing the board.
This manual is related to the following products:
- MVME2502 Installation and Use (August 2014) MVME2500 Installation and Use Manual (February 2014) MVME2500 ECC Installation and Use (August 2014) MVME2500 Installation and Use (April 2015) MVME2500 Installation and Use Manual (March 2015) MVME2502 Installation and Use (April 2014) MVME2502 Installation and Use (December 2014)