Artesyn MVME2502 Installation and Use (April 2015) - Manual (Page 137)

Boot System
MVME2502 Installation and Use (6806800R96E) 137
3. Transfer the files through the TFTP from the server to the local memory.
tftp 1000000
tftp 2000000
tftp C00000
4. Boot the Linux from the memory.
bootm 1000000 2000000 c00000
6.3.2 Booting from an Optional SATA Drive
1. Make sure that the
kernel, dtb,
and
ramdisk
are saved in the SATA drive with ext2
partition.
2. Configure U-Boot environment variable:
setenv File_uImage
setenv File_dtb
setenv File_ramdisk
saveenv
3. Copy the files from the SATA drive to the memory:
# option: scsi - interface, 0:1 - device 0 partition 1
ext2load scsi 0:1 1000000 $File_uImage
ext2load scsi 0:1 2000000 $File_ramdisk
ext2load scsi 0:1 c00000 $File_dtb
4. Boot the Linux in memory.
bootm 1000000 2000000 c00000
6.3.3 Booting from a USB Drive
1. Make sure that the
kernel, dtb
, and
ramdisk
are saved in the USB drive with FAT
partition.
2. Configure the U-Boot environment variable:
setenv File_uImage
setenv File_dtb
setenv File_ramdisk
saveenv
3. Initialize USB drive: