PRG Vx76 User Manual 3.6 User Manual
Page 67
VX76 SOFTWARE USER MANUAL
51
Eight select buttons are available for simplifying channel selection:
+
[Slice] -
for future use.
+
[Zero] - selects all channels in a
zero
* state.
+
[Mark] - selects all
marked
* channels.
+
[All] - selects all patched channels.
+
[Dynam] -
for future use.
+
[Active] - selects all channels with
active
* luminaires.
+
[Invert] - deselects currently selected channels and selects all other patched channels.
+
[Clear] - clears all channel selections.
Four status mimic buttons are available. These buttons highlight as indicators rather than as a selection tool:
+
[Online] - indicates all online luminaires.
+
[Active] - indicates all luminaires that are
active
*.
+
[Mark] - indicates all luminaires that are
marked
*.
+
[Zero] - indicates all luminaires that are in a
zero
* state.
Four luminaire utility buttons are also available. These apply only to selected luminaires:
+
[Start] - starts lamp for all selected arc luminaires with remote start capability.
+
[Douse] - douses lamp for all selected arc luminaires with remote start capability. Press and hold [Arm] while
pressing [Douse] to send the douse command.
+
[Arm] - must be held along with [Douse] or [Home/Reset] to complete the command.
+
[Home/Reset] - dual action button.
[Home] sets all parameter timing to zero and clears any intensity Mark or Zero states. Press and hold [Arm] while
pressing [Home/Reset] once.
[Reset] recalibrates luminaires. Press and hold [Arm] while pressing [Home/Reset] twice.
Also refer to
"Home / Reset (Recalibration)"
* Active - luminaires with intensity greater than zero (1-100%).
Marked - luminaires with an intensity state of "marked."
Zero - luminaires with an intensity state of zero ("hard zero", 0% level).
(For a more in-depth explanation, refer to
Invert
Mark
Slice
Zero
Clear
All
Online
Active
Mark
Zero
Start
Arm
Douse
Home
Reset