PRG Vx76 User Manual 3.6 - Manual (Page 222)

206 VX76 SOFTWARE USER MANUAL
FUNCTION KEYS
Setting Function Key Option
Selected keys from the command-line keypad are mapped to the computer keyboard’s function keys F1-F12.
Pressing these will open a window which takes the place of command-line functions such as Store, Selective Store,
Delete, At, etc.
Note: Computer keyboard "quick keys" are available for use in these windows. Refer to "Quick Keys" on page 209
for instructions.
Using Function Keys
Store - F1
Step 1. Using windows, set parameters for cue, preset, beam, color, group,
snapshot, macro, or board cue.
Step 2. Press F1. (Store window will open.)
Step 3. Select item to store.
Step 4. Enter number for future recall.
Step 5. Click OK.
Note: Plus is used with cue store operations. Selecting Plus and clicking OK will store cue to next cue number
according to increment shown in Encoder window. Refer to
"Encoders HUD Window" on page 70.
Selective Store - F2
Step 1. Using windows, set parameters you wish to modify or add in a
cue or preset.
Step 2. Press F2. (Selective Store window will open.)
Step 3. Select Cue or Preset.
Step 4. Enter range of cues or presets.
Step 5. Click OK.
Update - F3
Step 1. Using windows, modify required channels.
Step 2. Press F3. (Update window will open.)
Step 3. Select item for update.
Step 4. Enter item number where you wish to store modified channels.