Cue data – PRG Vx76 User Manual 3.6 User Manual
Page 284
268
VX76 SOFTWARE USER MANUAL
Cue Data
Cue parameter data can be viewed and edited in the Cue Data window. This window displays
each stored cue, channel, or parameter. The Cue Data window contains a customizable display
and toolbar.
Note: Cue data can only be edited if Patch editing is disabled.
View/Edit Cue Data:
Step
1. At Data menu, select Cue Data. Cue Data window will open.
Step
2. Once window is open, Enable Cue Editing menu option will be available (as long as
patch editing is disabled). If you wish to edit data, select this option. (Menu will now
read "Disable Cue Editing.") The [Edit] button is also available to enable/disable
editing.
Step
3. Edit data according to guidelines in
Step
4. Click Save Cue to save changes or click Revert to abort.
Step
5. To protect window from editing, select Disable Cue Editing.
The parameter columns which are displayed can be changed via the Parameter Columns window. Refer to
Options for display by
Cue, Channel or Parameter
Channel/Column
Toggles Value
or Percent Data
Follow Selection - Specifies that window will reflect
cue selections made at keypad when checked.
Show Unused Channels - Displays channels
that are in each cue when checked.
Settings Toolbar **
Display Settings
Display Settings (refer to next page)