PRG Vx76 User Manual 3.6 - Manual (Page 373)

VX76 SOFTWARE USER MANUAL 357
+ The Timecode Scripts window calculates timecode displayed for steps based on frame rate selected in the
Timecode window. When the frame rate is changed in the Timecode window, the Timecode Scripts window will
recalculate values according to the frame rate selected.
+ Multiple playback scripts are possible. Scripts selected in Timecode Scripts window are enabled for playback.
+ In the Timecode Scripts window individual hour/minute/second/frame times on a step can be edited without
affecting any other step times in the script.
Note: A timecode script can contain a maximum of 200 console events.
Using window:
+ To open, at Data menu, select Timecode Scripts.
+ Click on Steps drop-down arrow to view content of steps.
+ Edit as necessary.
Delete a step:
Step 1. Using trackpad, select step(s) to be deleted.
Step 2. Click on "trash can" icon. Step(s) will be removed.
Replace a step:
Step 1. Using trackpad, select step to be replaced.
Step 2. Click "replace" icon.
Step 3. At front panel, perform replacement action. (The first action taken will replace the selected step and editing
will end.)
Replace all steps from Step X on (through remainder of script):
Step 1. Using trackpad, select last "good" step. (Steps after this selection will be replaced.)
Step 2. Click "punch in" icon.
Step 3. At front panel, perform new series of actions.
Step 4. Click "stop record" icon.
Selected Script
Timing information (this information can be edited)
Delete
Replace
Punch In
Insert
Stop Record
Associated Cue