PRG Vx76 User Manual 3.6 - Manual (Page 212)

196 VX76 SOFTWARE USER MANUAL
Storing Effects as Cues
An effect can also be attached to a cue using the Link feature. When linked, the effect will appear in the Cue Sheet
Link column. This "effect cue" will behave just as any other standard cue and will allow other parameters or advanced
attributes to be stored along with the effect. Refer to
"Link" on page 250 for more information.
Recalling an effect cue does a normal cue recall for the cue data and then executes the effect. The cue data can place
channels in a desired state before the effect starts running.
Link an effect to a cue:
+ [Store] [n] [Link] [Effect] [x] [Enter] - stores effect x into the specified cue number n. (Current stage look is
not included.)
Link an effect to a cue and label:
When labeling, the name can be entered on the console touchscreen keyboard or computer keyboard.
+ [Store] [n] [Link] [Effect] [x] [Label]

xxxxxx

Enter/Accept

.
Utility Menu
The Utility Menu can be used for advanced selection of active set parts and for erasing set parts and sequence steps.
To use the menu:
Step 1. At Effect Edit screen, select required effect.
Step 2. Press [Utility Menu] button.
Step 3. Choose an option by touching.
Step 4. Confirm or reject warning dialog.
Link Effect #