Using the sequence edit screen – PRG Vx76 User Manual 3.6 User Manual
Page 209
VX76 SOFTWARE USER MANUAL
193
Using the Sequence Edit Screen
The Sequence Edit screen can also be used to create and edit sequence steps. This screen displays up to 50 steps at
a time, and will be necessary to use when any sequence requires more than seven steps (since the Effect Edit screen
will display a maximum of seven steps).
To open:
+
At Effect Edit screen, press [Edit Sequence] button.
An Effect Sequence palette is provided at the bottom of the screen, which provides access to all stored sequences.
When a sequence is selected in the palette, its steps will be displayed at the top of the screen. Sequences can be
created and edited here using the same operations as on the Effect Edit screen. Refer to
page 174 and
on page 178 for instructions.
By using the Sequence Edit screen, it is possible to create sequences
before
they are actually stored into an effect.
This can be useful if pre-programming is required.
Edit
Sequence
Button