PRG Vx76 User Manual 3.6 - Manual (Page 182)

166 VX76 SOFTWARE USER MANUAL
Step 6. Press

Start with Defaults

button. The dynamic will be applied to selected channels.
Step 7. Customize actions by selecting Waveform type, Bias, Direction, Gravity, Offset, etc.
Step 8. At soft encoders, press [Dynam] button to map dynamic options to encoders. Adjust Rate, Size, and Offset
by turning encoders. (Refer to "Using the Encoders with Dynamics" on page 157 for more information.)
Step 9. Press and hold [Store] while pressing any open

Dynamic Select Button

to store.
Step 10. Label dynamic. (When labeling, the name can be entered on the console touchscreen keyboard or
computer keyboard.)
a. Press and hold [Label] while pressing

Dynamic Select Button

.
b. Enter alpha/numeric label.
Playing Back a Custom Dynamic
Once created and stored into the Dynamics palette, custom dynamics can be easily recalled and applied to groups of
luminaires. The procedure for playing back a custom dynamic is the same as playing back a canned dynamic. Refer
to
"Playing Back a Canned Dynamic" on page 155 for instructions.