Inhibitive – PRG Vx76 User Manual 3.6 User Manual
Page 309
VX76 SOFTWARE USER MANUAL
293
Store a Freeze state as cue:
+
Press and hold
Freeze
while choosing a submaster. ("Choose" is activated by touching the specific submaster
on the touchscreen.)
Inhibitive
When set to the Inhibitive mode, the submaster will act as a grandmaster fader for all channels associated with that
submaster.
Note: Use the Channel Filter mode to select which channels will be controlled by the submaster. For instructions on
using the Channel Filter, refer to
To set Inhibitive mode using submaster touchscreen:
Step
1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step
2. Select
Inhibitive
checkbox.
Step
3. Press
Close
to close Setup screen.
To release a submaster from Inhibitive mode using submaster touchscreen:
Step
1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step
2. Deselect
Inhibitive
checkbox
or
press
Clear
to clear
all
submaster settings.
Step
3. Press
Close
to close Setup screen.
Press the area
below a
submaster’s
number to
"choose" the
submaster